Pstn Line Status - Linksys SPA1001 Administrator User Manual

Chapter 5 Linksys ATA Field Reference

PSTN Line Status

References to the SPA3102 also apply to the AG310.
Note
Field
(PSTN) Hook State
(PSTN) Line Voltage
(PSTN) Loop Current
Registration State
Last Registration At
Next Registration In
Last Called VoIP Number
Last Called PSTN Number
Last VoIP Caller
Last PSTN Caller
Last PSTN Disconnect Reason
PSTN Activity Timer
Mapped SIP Port
Document Version 3.2
Description
Hook state of the FXO port. Either On or Off.
The voltage existing on the PSTN line.
The current (milliamperes) existing on the local loop.
Indicates if the line has registered with the SIP proxy.
Last date and time the line was registered.
Number of seconds before the next registration renewal.
The last VoIP number called from the FXO Line.
The PSTN number dialed by the SPA (logged only if a non-trivial dial plan is used).
The last VoIP caller to the FXO Line.
Name and number of the last PSTN caller.
Reason for SPA hanging up the FXO port. Can be one of the following:
• PSTN Disconnect Tone
• PSTN Activity Timeout
• CPC Signal
Polarity Reversal
•
VoIP Call Failed
•
VoIP Call Ended
•
Invalid VoIP Destination
•
Invalid PIN
•
PIN Digit Timeout
•
VoIP Dialing Timeout
•
PSTN Gateway Call Timeout
•
VoIP Gateway Call Timeout
•
Shows the time (ms) before the SPA disconnects the current gateway unless the PSTN side
has some audio activity.
Same as Line 1.
Linksys IP Phone Administrator Guide
Info Tab
5-5