Regional Tab; Call Progress Tones - Linksys SPA1001 Administrator User Manual

Chapter 5 Linksys ATA Field Reference

Regional Tab

This section describes the fields for the following headings on the Regional tab:
•
•
•
•
•
•
•
•
•
•

Call Progress Tones

Field
Dial Tone
Second Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning Tone
Document Version 3.2
Call Progress Tones, page 5-19
Distinctive Ring Patterns, page 5-21
Distinctive Call Waiting Tone Patterns, page 5-21
Distinctive Ring/CWT Pattern Names, page 5-22
Ring and Call Waiting Tone Spec, page 5-23
Control Timer Values (sec), page 5-23
Vertical Service Activation Codes, page 5-24
Vertical Service Announcement Codes, page 5-28
Outbound Call Codec Selection Codes, page 5-28
Miscellaneous, page 5-30
Description
Prompts the user to enter a phone number. Reorder Tone is played automatically when
<Dial Tone> or any of its alternatives times out.
The default is 350@-19,440@-19;10(*/0/1+2).
Alternative to the Dial Tone when the user dials a three-way call.
The default is 420@-19,520@-19;10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter an external phone number, as
opposed to an internal extension. It is triggered by a, (comma) character encountered in
the dial plan.
The default is 420@-19;10(*/0/1).
Prompts the user to enter a call forwarding phone number.
The default is 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an outbound call.
The default is 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after the far end hangs up during an established
call. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives
times out.
The default is 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed the handset on the cradle.
Warning Tone is played when Reorder Tone times out.
The default is 480@10,620@0;10(.125/.125/1+2).
Linksys IP Phone Administrator Guide
Regional Tab
Off Hook
5-19