Figure 6-5: More Information - Wireless Network Status - Linksys HU200 User Manual

Home Wireless-G USB Adaptor
Wireless Network Status
The Wireless Network Status screen provides information on your current network settings.
Status - The status of the wireless network connection.
SSID - This is the unique name of the wireless network.
Wireless Mode - The mode of the wireless network currently in use is displayed here.
Transfer Rate - The data transfer rate of the current connection is shown here.
Channel - This is the channel to which the wireless network devices are set.
Security - The status of the wireless security feature is displayed here.
Authentication - This is your wireless network's authentication method.
IP Address - The IP Address of the Adaptor is displayed here.
Subnet Mask - The Subnet Mask of the Adaptor is shown here.
Default Gateway - The Default Gateway address of the Adaptor is displayed here.
DNS - This is the DNS address of the Adaptor.
DHCP Client - This displays the Adaptor's status as a DHCP client.
MAC - The MAC address of the wireless network's access point is shown here.
Signal Strength - The Signal Strength bar indicates the signal strength.
Link Quality - The Link Quality bar indicates the quality of the wireless network connection.
Click the Statistics button to go to the Wireless Network Statistics screen. Click the Back button to return to the
initial Link Information screen. Click the Save to Profile button to save the currently active connection settings to
a profile.
Chapter 6: Using the Wireless Network Monitor
Link Information

Figure 6-5: More Information - Wireless Network Status

18