Proxy And Registration (Spa3102/Ag310) - Linksys SPA1001 Administrator User Manual

Chapter 5 Linksys ATA Field Reference
Refer-To Target Contact
Sticky 183

Proxy and Registration (SPA3102/AG310)

Field
Proxy
Use Outbound Proxy
Outbound Proxy
Use OB Proxy In Dialog
Register
Make Call Without Reg
Register Expires
Ans Call Without Reg
Use DNS SRV
DNS SRV Auto Prefix
Document Version 3.2
To contact the refer-to target, select yes. Otherwise, select no.
The default is no.
If this feature is enabled, the IP telephony ignores further 180 SIP responses after
receiving the first 183 SIP response for an outbound INVITE. To enable this feature,
select yes. Otherwise, select no.
The default is no.
Description
SIP proxy server for all outbound requests.
Enable the use of <Outbound Proxy>. If set to no, <Outbound Proxy> and <Use OB Proxy
in Dialog) is ignored.
The default is no.
SIP Outbound Proxy Server where all outbound requests are sent as the first hop.
Whether to force SIP requests to be sent to the outbound proxy within a dialog. Ignored
if <Use Outbound Proxy> is no or <Outbound Proxy> is empty.
The default is yes.
Enable periodic registration with the <Proxy>. This parameter is ignored if <Proxy> is not
specified.
The default is yes.
Allow making outbound calls without successful (dynamic) registration by the unit. If No,
dial tone will not play unless registration is successful.
The default is no.
Allow answering inbound calls without successful (dynamic) registration by the unit. If
proxy responded to REGISTER with a smaller Expires value, the PAP2T will renew
registration based on this smaller value instead of the configured value. If registration
failed with an Expires too brief error response, the PAP2T will retry with the value given
in the Min-Expires header in the error response.
The default is 3600.
Expires value in sec in a REGISTER request. PAP2T will periodically renew registration
shortly before the current registration expired. This parameter is ignored if <Register> is
no. Range: 0 – (231 – 1) sec
Whether to use DNS SRV lookup for Proxy and Outbound Proxy.
The default is no.
If enabled, the PAP2T will automatically prepend the Proxy or Outbound Proxy name with
_sip._udp when performing a DNS SRV lookup on that name.
The default is no.
Linksys IP Phone Administrator Guide
PSTN Line Tab
5-53