Voip Fallback To Pstn (Spa3102/Ag310); Dial Plan - Linksys SPA1001 Administrator User Manual

Line Tab

VoIP Fallback to PSTN (SPA3102/AG310)

Field
Auto PSTN Fallback

Dial Plan

The default dial plan script for each line is as follows:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.). The syntax for a dial plan
expression is as follows:
Table 1-35 Dial Plan Script Syntax
Dial Plan Entry
*xx
[3469]11
0
00
[2-9]xxxxxx
1xxx[2-9]xxxxxx
xxxxxxxxxxxx.
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where '@', '.', and ':' are dialed by
entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and
port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the
user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number
according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is
enabled.
Field
Linksys IP Phone Administrator Guide
5-46
Description
If enabled, the SPA will automatically route all calls to the PSTN gateway when the Line
1 proxy is down (registration failure or network link down).
The default is yes.
Description
Chapter 5
Functionality
Allow arbitrary 2 digit star code
Allow x11 sequences
Operator
Int'l Operator
US local number
US 1 + 10-digit long distance number
Everything else (Int'l long distance, FWD, ...)
Linksys ATA Field Reference
Document Version 3.2