The Paper Stock Tab - Xerox DocuColor 252 User Manual

186

The Paper Stock Tab

Paper Size
From the Size list, select the desired stock size. If you select Custom:
a. Type the desired height and width.
b. Select the desired feed direction:
•
LEF (Long Edge Feed)
•
SEF (Short Edge Feed)
Tray
In the Tray list, select the desired tray, and load the specific stock in this tray. If
you select Auto, any tray with the specific paper stock is used.
Note: Make sure that the paper in the selected tray complies with all the other
paper stock parameters. If the paper in the tray does not match all the paper
stock parameters, the job is frozen.
Mixed Paper Size
Select the Mixed paper size document check box if the job contains different
paper sizes.
Media Type
1. In the Media Type list, select the desired media.
Transparency
Tip: If you selected
to insert a blank page between each transparency. To customize the
interleave, select a different paper size, media type, or tray from the
appropriate lists.
Chapter 8 – Setting Parameters
Add interleave
, select the check box