Calibration
To save a new calibration table:
1.
In the Edit Calibration dialog box, adjust calibration table values and parameters
as desired.
2. Click Save As.
The Save As dialog box appears.
3. In the File Name box, type the new calibration table name.
Note: You can't overwrite the default calibration tables,
Spire Saturated
.
4. Click OK.
The calibration table is saved with the new name.
Note: To edit a calibration table, select
information about a calibration table, select
5. Click Close to exit the Edit Calibration dialog box.
Backing Up Calibration Tables
1.
Locate the ColorCalibrationDB folder. Go to
C:\CX260\General\ColorCalibration\ColorCalibrationDB.
2. Open the ColorCalibrationDB folder.
3. Copy the desired calibration table files to your back up location.
Spire Normal
Tools > Calibration > Edit.
Tools > Calibration > Info
135
and
To view
.