Xerox DocuColor 252 User Manual page 135

Calibration
To connect the Eye-One spectrophotometer to the Spire CX260
Connect one end of the Eye-One Spectrophotometer cable to the Spire CX260
USB port, and connect the other end to the Eye-One Spectrophotometer.
To calibrate the Eye-One Spectrophotometer
Place the spectrophotometer on its plate. It is automatically calibrated.
Setting the Calibration Method on the Spire CX260
By default, the calibration method is set to Off-the-glass calibration. To calibrate
using the Eye-One spectrophotometer, set the calibration method to use an external
device.
To set the calibration method:
1. In the Settings window, under Calibration Device, select the Use external
calibration device check box.
2. Click Save.
127