Finishing
PCL paper source command
Tray programming
Tray confirmation
4- 4
Use the PCL Paper Source command <esc & 1 # H> to program a
PCL print job to use a specific paper. The PCL decomposer on the
Xerox FreeFlow Print Server Controller reads the paper source
command and, using the PCL Paper Sources option in the Queue
Properties and maps the command to the appropriate paper. The
number code corresponds to the following PCL Paper Source
programmed in Queue Properties.
To program the PCL Paper Source, use the following guidelines:
Standard: <ESC>&11H
Manual Paper Feed: <ESC>&13H
Manual Envelope Feed: <ESC>&13H
Lower: <ESC>&14H
Large Capacity: <ESC>&15H
Envelope Feed: <ESC>&16H
Tray confirmation selections control:
•
whether a confirmation pop-up window appears on the
screen after a tray has been opened and closed
•
what attributes are assigned to that tray
•
whether the action is automatic or requires user action to
confirm the programming change
To set tray programming options, perform the following:
1. On the main menu select [Setup]
2. Select [System Preferences]
3. Select the [Stocks and Trays] tab
Settings are system-wide and are applied immediately. No restart
of the Xerox FreeFlow Print Server software required.
System Guide