Select Another Server-Adapter Pair; Exit Hp Netraid Assistant - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Hp netraid 1m/2m installation & configuration
Hide thumbs Also See for P3410A - NetRAID 1M RAID Controller:
Table of Contents

Advertisement

Chapter 9
View Only mode does not require a password, and does not permit users
to change the configuration. All menu selections that would change the
configuration are inactive. Examples of operations that you can perform in
View Only mode are displaying the properties of physical and logical
drives and viewing the configuration.
NOTE
You cannot enter Full Access mode on a server if it is already
being managed by HP NetRAID Assistant in Full Access
mode, or by another HP NetRAID utility. However, View Only
mode can always be entered.
The only distinction the Main Screen shows between the Full Access and View
Only modes is that in View Only mode various actions are inoperative and the
related menu options are grayed out.
To change to another adapter within the server, use the Adapter pull-down list.

Select Another Server-Adapter Pair

Use these pull-down lists on the HP NetRAID Assistant Main Screen to select the
next server-adapter pair to be viewed or modified.
NOTE
You cannot leave the current server-adapter pair if any
operations--such as Performance Monitor or the rebuilding or
reconstruction of a drive--are running in Full Access mode.
You cannot change from View Only mode to Full Access
mode. Instead, exit HP NetRAID Assistant and restart. Choose
the server and Full Access mode. Then enter the password.
When selecting a new server in Full Access mode, a dialog box appears. Enter
the new server's password, which is case-sensitive. The new server cannot be
accessed if it is already being managed by a system in Full Access mode, or if
either of the following utilities is running on the new server:
HP NetRAID Assistant
HP NetRAID Config

Exit HP NetRAID Assistant

Exit HP NetRAID Assistant by choosing Exit from the Configuration menu, or
by clicking the Exit button in the toolbar, or by double-clicking the upper-left
corner of the main window.
Managing Servers Over the Network
121

Advertisement

Table of Contents
loading

Table of Contents