Chapter 1
HP NetRAID-2M
The HP NetRAID-2M adapter has two channels with both internal and external
connections. The HP NetRAID-2M adapter supports:
Fast/Wide SCSI (at data transfer rates of up to 20 MB/sec per channel)
Ultra/Wide SCSI (at data transfer rates of up to 40 MB/sec per channel)
Ultra2 SCSI (at data transfer rates of up to 80 MB/sec per channel)
Ultra3 SCSI (at data transfer rates of up to 160 MB/sec per channel)
The HP NetRAID-2M adapter supports a maximum of six or twelve disk drives
per channel.
Number of Disk Drives That Can Be Connected to the
Channel
Using Internal
0
1
* External storage with HP Rack Storage/12 supports a maximum of 12 Ultra3 SCSI disk
drives.
HP NetRAID-2M External SCSI Cables
External Device
HP Rack Storage/12
HP Rack Storage/12
If the necessary cables were not supplied with your system, see HP's Order
Assistant for ordering information. Order Assistant is available on the Internet
at: http://netserver.hp.com/netserver/ .
HP NetRAID-2M
Using External
Connectors
6 or fewer
6 or fewer
Length of
External SCSI Cable
Cable
5 meters
10 meters
Introduction
Connectors*
12 or fewer
12 or fewer
D6982A
D6983A
3