Chapter 2
Channel 0
Hot
Spare
Global
Hot Spare
Figure 2-3. Sample Configuration with Three Arrays and
Understanding RAID Levels
During installation, you configure your logical drives by running a disk array
configuration utility. Each of the logical drives you define must have an assigned
RAID level. Each RAID level has different advantages in terms of performance,
redundancy, and capacity. HP NetRAID-1M and 2M adapters support both basic
array and spanned array configurations.
Basic arrays have logical drives that are contained entirely within the
array. Basic array configurations use RAID levels 0, 1, or 5.
HP NetRAID Adapter
LD0
LD0
Array A0
Array A1
Three Logical Drives
RAID Overview
Channel 1
LD1
LD2
LD2
LD2
LD1
LD2
LD1
LD2
LD2
Array A2
13