Download Print this page

HP D7171A - NetServer - LPr Fact Sheet

Redefining high-availability for the enterprise intel-based server
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

Fact Sheet
HP NetServer LXr 8000:
for the enterprise Intel-based server
Processor: One to four Intel Pentium II Xeon 400
MHz processors with 512KB and 1MB cache and
Intel 440NX chip set
Product Design: Compact rack-mount platform
(7U height – 12.25") allowing fast installation and
easy access for under one-minute replacement of
components
Upgradeability: Upgradeable to 8-way
multiprocessing and future processors in early
1999
ECC Memory: 256MB to 8GB 100 MHz ECC
memory with memory scrubbing
I/O Expansion Slots: 10 total, full length PCI;
four 64-bit hot-swap slots, five 32-bit slots, one
shared 32-bit PCI/ ISA slot
Ultra2 SCSI Controller: Integrated dual-channel
Ultra2 SCSI controllers that connect up to 15
devices per channel and with 80MB/sec data
transfer rate, which is two times better
performance than the Wide-Ultra SCSI-3
controller
Mass Storage: Two hot-swap, Ultra2 SCSI low-
profile bays
External Storage: Highly dense 3U Rack
Storage/8 external mass storage enclosure.
Upgradeable into fibre channel environment in
early 1999.
Disk Array Controller: Optional HP NetRAID
3Si, Ultra2 SCSI, high performance I
DAC
Network Interface: HP 10/100TX PCI LAN
adapter; support for redundant NICs
Storage Backup: Optional HP SureStore Tape
Rack enclosure which incorporates up to 4
removable DAT 24, DLT40r, or DLT70r drives
delivering 24-280 GB capacity
Power Supplies: Three N+1 redundant, hot-
swappable power supplies
Redefining high-availability
September 15, 1998
O capable
2
Cooling System: 6 hot-swappable redundant fans,
individually removable
Performance: Highest performance Intel-based
server:
TPC-C: pending audit
TPC-D: First IA server to report 300GB
results; breakthrough price/performance
results pending audit
SAP R/3: 2,500 SD Users @1.97 secs
SpecWeb96: 3,435 (NT/ IIS)
SPECint95: Compute power rivals RISC
at 16.5
System Management Software: HP TopTools
web browser based device management and HP
OpenView ManageX/SE for NOS and application
management, with new clustering support
Remote Administration: Pre-installed HP
TopTools Remote Control Card for secure remote
access regardless of system state, over LAN or
modem
Integrated System and Network Management:
Management tools integrated with HP OpenView
Network Node Manager and other enterprise
applications
Support Options:
99.9% Uptime Commitment
Hardware call to repair commitment within 6
hours
A wide range of proactive and reactive
software support services to meet customers'
varying business needs, now available as HP
Support Packs from resellers
Solution Delivery: Racks Express offers pre-
configured, pre-tested delivery of rack and cluster
solutions to reseller or end-user

Advertisement

loading