Table of Contents
Advertisement
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See
page 17
for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press MENU/EXIT to open the OSD menu and press
2. Press
to highlight Audio Settings and press ENTER. The Audio Settings page is displayed.
3. Highlight Mute and press
If available, you can also press MUTE on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press VOLUME+
1. Repeat steps 1-2 above.
2. Press
to highlight Volume and press
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat steps 1-2 above.
2. Press
to highlight Power On/Off Ring Tone and press
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or
changing the sound level will not affect the Power On/Off Ring Tone.
Setting the lamp mode
This projector is capable of dual-lamp projection and provides several lamp modes for different purposes:
Lamp mode
Dual-Brightest
(Two lamps are used in normal
mode)
Dual-Reliable
(Two lamps are used in
economic mode)
Single-Alternative
(The lamp with shorter operating
hours is selected automatically
and used in normal mode)
Single-Eco
(The lamp with shorter operating
hours is selected automatically
and used in economic mode)
You can perform the following steps to choose a lamp mode according to your preference.
1. Press MENU/EXIT and then press
2. Press
to highlight Lamp Settings and press ENTER.
3. Press
to highlight Lamp Mode and press ENTER.
4. Press
to highlight your preferred lamp mode and press ENTER.
5. A confirmation message displays. Highlight Yes and press ENTER.
36
Using the projector
/
to select On.
VOLUME- on the remote control, or:
/
/
to select a desired sound level.
User Benefit
•
Delivering super-bright and clear images
•
Suitable for high-ambient-light environments
•
Allowing continuous and non-stop operation
under critical situations
•
Extending the lamp life
•
Allowing continuous and non-stop operation
under critical situations
•
Extending the total operation time
•
Reducing lamp replacement frequency
•
Extending the lamp life
•
Extending the total operation time
•
Reducing lamp replacement frequency
/
until the Advanced Setup menu is highlighted.
"Connecting with video equipment" on
/
to highlight the Advanced Setup menu.
/
to select Off.
Suitable environment
Large, well lit meeting
rooms or auditoriums
Mid-large boardrooms
Normal sized rooms
Small to normal sized
rooms
Advertisement
Table of Contents
