Setting A Preferred Color Temperature - BenQ SH960 User Manual

Setting a preferred color temperature

To set a preferred color temperature:
1. Highlight Color Temperature and select User 1, User 2, or User 3 by
pressing / on the projector or remote control.
2. Press to highlight Color Temperature User_ Fine Tuning and press
ENTER. The Color Temperature User_ Fine Tuning page is displayed.
The menu name "User_" corresponds with the setting selected
in Color Temperature.
3. Press / to highlight the item you want to change and adjust the values by pressing
• Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
• Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4. To save and leave the settings, press MENU/EXIT.
Selecting a Gamma setting
Highlight Gamma Selection and select a preferred setting by pressing
on the projector or remote control.
Gamma refers to the relationship between input source and picture
brightness.
• Gamma 1/2/3
Select these values according to your preference.
• Gamma 4
Increases the average brightness of the picture. Best for a lit
environment, meeting room or family room.
• Gamma 5/6
Best for viewing movies in a darkened environment.
• Gamma 7/8
Best for viewing movies which are mostly composed of dark scenes.
High Brightness
Low Contrast
1 2
Adjusting Brilliant Color
This feature utilizes a new color-processing algorithm and system level
enhancements to enable higher brightness while providing truer, more
vibrant colors in picture. When set to "Off", Brilliant Color is disabled.
Low Brightness
High Contrast
3 4 5 6 7
/
8
Color Temp User 1 Fine Tuning
Red Gain +50
Green Gain
+50
Blue Gain +50
+50
Red Offset
Green Offset +50
+50
Blue Offset
EXIT Back
/ .
Picture -- Advanced
Black Level 0 IRE
Clarity Control
T1
Color Temperature
Color Temperature User_ Fine Tuning
Gamma Selection 2
Brilliant Color On
3D Color Management
On
Film Mode
3D Comb Filter
On
S-Video
EXIT Back
Picture -- Advanced
Black Level 0 IRE
Clarity Control
Color Temperature T1
Color Temperature User_ Fine Tuning
Gamma Selection 2
Brilliant Color
On
3D Color Management
On
Film Mode
3D Comb Filter On
S-Video EXIT Back
Using the projector
31