Controls And Functions; Control Panel - BenQ SH960 User Manual

Controls and functions

Control panel

1
2
3
4
5
6
7
8
9
7
10
1. Focus ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the projected image.
3. TEMPerature warning light
Lights up or flashes if the projector's
temperature becomes too high.
4. POWER indicator light
Lights up or flashes when the projector is
operating.
5. MODE
Sequentially selects a predefined picture setting
available for each input.
I
6. I POWER
Performs the same action as POWER on the
remote control.
Toggles the projector between standby and on.
10 Overview
7. Arrow/Keystone keys (Left
Right
Moves the current On-Screen Display (OSD)
menu selection in the direction of the arrow
being pressed when the OSD menu is activated.
Manually corrects distorted pictures resulting
from an angled projection.
8. MENU/EXIT
Toggles the On-Screen Display (OSD) menu on
and off.
Goes back to previous OSD menus, exits and
saves any changes made using the On-Screen
11
Display (OSD) menu.
12
9. ENTER
13
Enacts the selected On-Screen Display (OSD)
7
menu item.
14
10. BLANK
7
Used to hide the screen image.
11. LAMP indicator light 1, 2
Lights up or flashes when the projector lamp
has developed a problem.
12. ASPECT
Selects the display aspect ratio.
13. AUTO
Automatically determines the best picture
timings for the displayed image.
14. SOURCE
Performs the same action as the source selection
keys (HDMI, VIDEO, S-VIDEO,Component 1,
Component 2, PC) on the remote control.
Switches sequentially through input sources.
/ , Up
/ , Down / )
/ ,