Table of Contents
Advertisement
1. After the start-up logo, press MENU/EXIT and then press
the Advanced Setup menu is highlighted.
2. Press
to highlight Lamp Settings and press ENTER. The Lamp
Settings page is displayed.
3. Highlight Reset Lamp Timer 1/Reset Lamp Timer 2 and press ENTER.
A warning message is displayed asking if you want to reset the lamp
timer. Highlight Reset and press ENTER. The lamp time will be reset
to "0".
56
Additional information
/
until
Advanced Setup
Lamp Settings
HDMI Settings
Baud Rate
High Altitude Mode
Audio Settings
Password
Lan Control Settings
Reset All Settings
Direct Power On
Signal Power On
Expert Mode
S-Video
Lamp Settings
Lamp Mode
Reset Lamp Timer 1
Reset Lamp Timer 2
Equivalent Lamp Hour #1
Equivalent Lamp Hour #2
WARNING
Reset Lamp Timer?
Reset
ENTER
115200
Off
Off
Off
EXIT Back
ENTER
50 hours
50 hours
EXIT Back
Cancel
Advertisement
Table of Contents
