Table of Contents
Advertisement
Selecting an input source
The projector can be connected to multiple equipment at the same
time. When the projector is first turned on, it will attempt to reconnect
with the input source which was in use when the projector was last
shut down.
To select the video source:
•
Using the remote control or projector
Press one of the Source keys on the remote control, or press SOURCE
repeatedly until your desired signal is selected.
•
Using the OSD menu
1. Press MENU/EXIT and then press /
menu is highlighted.
2. Press
to highlight Input Source and press ENTER. The source
selection bar is displayed.
3. Press
/ repeatedly until your desired signal is selected and press
ENTER.
Once detected, the selected source information will be displayed on
the screen for seconds. If there are multiple pieces of equipment
connected to the projector, you can go back to the source selection
bar again to search for other signals.
•
If you want the projector to automatically search for the signals,
select On in the System Setup > Quick Auto Search menu.
•
If you want to use the PIP function, see
image source simultaneously" on page 41
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and
the projected picture displays wrong colors, please change the color space to YUV.
1. Press MENU/EXIT and then press
2. Press
to highlight Color Space Conversion and press
This function is only available when the HDMI input port is in use.
until the System Setup
"Displaying more than one
for details.
/
until the Display menu is highlighted.
/
to select a suitable color space.
System Setup
Language
English
Splash Screen
BenQ
Projector Position
Floor Front
Auto Power Off
Disable
Sleep Timer
Disable
Background Color
Blue
Menu Settings
Input Source
ENTER
Quick Auto Search
On
Closed Caption
Standby Monitor Out
Off
S-Video
EXIT Back
NOTE: When
HDMI
automatically
searching for a valid
Video
input source, the
S-Video
projector cycles
through the
Component 1
available signals
Component 2
following the
sequence from top
PC
to bottom as the
source selection bar
shows.
Using the projector
21
Advertisement
Table of Contents
