BenQ SH960 User Manual page 46

Picture -- Basic menu
Function
Picture Mode
Load Settings From
Brightness
Contrast
Color
Tint
Sharpness
Reset Picture
Settings
Rename User Mode
Picture -- Advanced menu
Function
Black Level
Clarity Control
Color Temperature
Color Temperature
User_ Fine Tuning
Gamma Selection
Brilliant Color
3D Color
Management
Film Mode
3D Comb Filter
46 Using the projector
Pre-defined picture modes are provided so you can optimize your projector
picture set-up to suit your program type. See
page 27 for details.
Selects a preset mode that most suits your need for the picture quality and
further fine-tune the picture based on the selections listed below. See
User 1/User 2 mode" on page 28
Adjusts the brightness of the picture. See
details.
Adjusts the degree of difference between dark and light in the picture. See
"Adjusting Contrast" on page 29
Adjusts the color saturation level -- the amount of each color in a video picture.
See "Adjusting Color" on page 29
Adjusts the red and green color tones of the picture. See
page 29 for details.
Adjusts the picture to make it look sharper or softer. See
on page 29 for details.
Returns all settings in the Picture -- Basic and Picture -- Advanced menus to the
factory preset values. See "Resetting the picture mode" on page 28
Renames User 1, User 2, or sRGB. See
details.
Sets the picture grayscale as 0 IRE or 7.5 IRE. See
page 30 for details.
Adjusts the picture clarity. See
There are several color temperature settings available. See
temperature*" on page 30
See "Setting a preferred color temperature" on page 31
See "Selecting a Gamma setting" on page 31
See "Adjusting Brilliant Color" on page 31
See "Color Management" on page 32
See "Setting Film Mode" on page 32
See "Setting 3D Comb Filter" on page 33
Description
"Selecting a preset mode" on
for details.
"Adjusting Brightness" on page 29
for details.
for details.
"Renaming user modes" on page 28
Description
"Setting Black Level" on
"Controlling image clarity" on page 30
for details.
for details.
for details.
for details.
for details.
for details.
"Setting the
for
"Adjusting Tint" on
"Adjusting Sharpness"
for details.
for
for details.
"Selecting a color
for details.