List Of Machine Management Settings - Konica Minolta bizhub 25 Administrator's Manual

List of Machine Management Settings

You can specify the important settings related to the machine, such as the user install
mode and security communication settings, and network settings, etc.
If you set an administrator password, a screen for entering the administrator password is
displayed whenever [Management] is pressed, which enables you to prevent users other
than the administrator from changing the settings.
Function
Security
Communication
Function
Protect Setting
Mode Protect
Setting
User
Access/Cost
Accounting
Network
Settings
User Install
2-2

List of Machine Management Settings

Description
You can specify the various
security communication settings,
such as closed transmission, ID
check verification, destination
confirmation, and security reception
settings.
You can manage the various settings
using an administrator password
and protect passcode.
You can set the machine to prohibit
the copy, scan, fax, or print modes
from being used.
You can check the total number of
pages and communication time used
by each user for copies and faxes,
set a charge per page, and calculate
the total cost each user has incurred
for copies and faxes.
You can set the network settings for
using the machine on a network.
You can specify the settings required
for using the machine.
Settings
Closed Transmission,
Closed Reception, ID
Check Tx, Confirm
Destination, Confirm
Speed-Dial, Confirm
Numeric keys,
Passcode Polling
OFF
ON
Broadcast Tx
OFF
ON
Secure Reception
OFF
ON (current time)
Passcode
0000 to 9999: 0000
Prohibited
Protect ON
Protect OFF
OFF
ON
Currency Setting
Dollar
Euro
Pound
Yen
No Unit
Charge Setting
Copy, Scan, Fax, Print:
OFF
ON (0.00 / page)
Reference page
2-10
2-27
2-32
2-37
2-42
Chapter 3, "Initial
Setup (User
Install)" in the
Scanner and Fax
Guide.