4-1 Electrophotographic system
Electrophotography is the technology used in laser printing which transfer data representing texts
or graphics objects into a visible image which is developed on the photosensitive drum, finally
fusing on paper, using light beam generated by a laser diode.
This section provides technical details on the printer's electrophotography system.
4-1-1 Electrophotographic cycle
The electrophotography system of the printer performs a cyclic action made of six steps as follows.
Each step is technically explained in the following sections.
The sections for main charging, exposure (drum), developing, and cleaning are modularized in one
Process unit PU-42.
Process unit
1
Main charging
6
Cleaning
4
5
Fusing
Fuser unit
Figure 4-1-1 Electrophotographic cycle
Laser scaner unit
2
Exposure
Drum
3
Developing
Transfer
4-3
FS-1050