Installing The Dimm - Kyocera FS-1050 - B/W Laser Printer Service Manual

(4) Installing the DIMM

The main board of the printer is equipped with one socket for memory expansion. Expansion memory
is available in the form of DIMM (Dual In-line Memory Module).
CAUTION Take precautions that no foreign substances such as metal chips or liquid get
inside the printer during the installation process. Operation of the printer during
the presence of a foreign substance may lead to fire or electric shock.
WARNING Turn the printer's power switch off. Unplug the printer's power cable and
disconnect the printer from the computer or the network.
Remove the side cover 1 as shown in the figure below.
Step 1
Remove
one screw.
FS-1050
1
Figure 2-2-7 Removing side cover
Step 2
1
2-10