Removing The Main Board - Kyocera FS-1050 - B/W Laser Printer Service Manual

(2) Removing the main board

1. Remove the process unit (See page 5-4).
2. Remove the top/face-down output tray and right cover (See pages 5-4 and 5-5).
3. Remove two connectors 1 from main board 2.
4. Remove six screws 3.
5. Remove the controller box (with main board) 4.
1
3
1
3
2
Figure 5-2-11 Removing the controller box (with main board)
FS-1050
4
5-12