Advertisement
Quick Links
FS-1000(+), FS-1010, FS-1050 & FS-1020D
Toner Installation
The TK-17 (TK-18 for the FS-1020D) contains the following items:
Toner container
•
Wiper (lint-free) cloth
•
Plastic bag
•
Instructions
•
The initial toner kit supplied with the printer comprises only the toner container
and wiper cloth.
1. Open the printer's top
cover.
2. Pull lock lever #1 to the
release (UNLOCK)
position, then pull lock
lever #2 to the release
(right) position.
3. Gently remove the old
toner container. Put it in
the supplied plastic bag
and dispose of it.
4. Take the toner container
from the bag. Hold it
with the protective seal
(orange-coloured) facing
up. Shake the toner
container horizontally at
least 5 times. This
ensures that the toner is
evenly distributed inside.
Advertisement
Related Manuals for Kyocera FS-1000
Summary of Contents for Kyocera FS-1000
- Page 1 FS-1000(+), FS-1010, FS-1050 & FS-1020D Toner Installation The TK-17 (TK-18 for the FS-1020D) contains the following items: Toner container • Wiper (lint-free) cloth • Plastic bag • Instructions • The initial toner kit supplied with the printer comprises only the toner container and wiper cloth.
- Page 2 5. Carefully remove the protective seal (orange- coloured). 6. Install the new toner container in the printer. Push firmly on the top of the container at the positions marked PUSH HERE until you hear it click in place. 7. While pushing down on the toner container, push lock lever #1 to the lock (LOCK) position.