10. Reconnect the external cables and power cords; then, turn on the attached
60
System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
the expansion slot. For a full-length adapter, make sure that the front edge of
the adapter is correctly seated in the correct slot in the front adapter-retention
bracket.
Rear adapter
retention
bracket
Expansion-slot
screw
Adapter
6. Install an expansion-slot screw at the rear of the adapter.
7. If you are installing a full-length adapter, press on the release lever on the right
side of the front adapter-retention bracket to release the retaining tab on the
left side of the bracket.
8. Connect required cables to the adapter. Route cables so that they do not block
the flow of air from the fans.
9. Install and lock the side cover (see "Installing the side cover" on page 53).
devices and turn on the server.
Left side
Front adapter
retention bracket
Right side