IBM 436854u - System x3200 M2 5U Mini Tower Server Problem Determination And Service Manual page 240

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, System x3200 M2 Types 4367 and 4368," on page 33 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
System-error log message
Received alert from system x; type:y, sender's
ID:z
Remote access attempt failed
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from WEB
browser at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from TELNET
client at IP@=yyy.yyy.yyy.yyy
Remote Login Successful. Login ID:
Remote Login Successful. Login ID:'x' from
CMD mode client at IP@=yyy.yyy.yyy.yyy
Retried alert accepted from system x; type:y,
sender's ID:z
Retry count exceeded. Incorrect password
entered too many times for userid w, x, y, z
RS485 broadcast from x ignored; more than y
devices present on the RS485 network
RS485 connection to system x has ended
RS485 network overload has cleared; x or fewer
devices are present on the RS485 network
RSA x Became the ISMP Gateway
Running the backup ASM main application
Secondary Device Event[00 x UNKNOWN-y]
Sending alert to remote system x; type:y, ID:z
Serial tamper delay triggered. Possible serial
port break in attempt
System board is over recommended
temperature
System board is under recommended
temperature
System Complex Powered Down
System error log full
222
System x3200 M2 Types 4367 and 4368: Problem Determination and Service Guide
Action
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
1. Make sure that the fans have good airflow and are not
obstructed.
2. (Trained service technician only) Replace the system board.
1. Make sure that the fans have good airflow and are not
obstructed.
2. (Trained service technician only) Replace the system board.
Information only.
Clear the current logs.