C
OPYING
NOTE
Factory default setting is Copy mode.
B
ASIC OPERATION
1.
Place your document(s) with text face Up in the ADF or face Down on the glass.
2.
Set your copying options as required. For further details refer to the following
sections.
3.
Then press the Start button.
NOTE
When using the ADF, in order to prevent paper jams, if you wish to cancel the
copy process, press the Stop button once to stop the process and a second
time to eject the paper.
A
DVANCED OPERATION
Using the options available, you can alter the copy output to suit your needs:
1.
Press Enter button.
2.
Select required parameter with Down arrow key and press Enter.
3.
Pressing Up and Down arrow keys, select value and press Enter.
Options are (factory default settings in bold text):
MENU ITEM
Copies
Reduce/Enlarge
Paper Supply
Mode
Density
Input Tray
Collate
Duplex
N-up
Edge_Erase
M_SHIFT_R
M_SHIFT_B
OPTIONS
1 - 99
A4>A5, Leg14>Let, Leg13.5>Let,
Leg13>Let, A4>B5, Fit to page, 100%,
B5>A4, Let>Leg13, Let>Leg13.5,
Let>Leg14, A5>A4, Custom
Legal13, Legal13.5, Legal14, Letter, A4, A5,
B5
Mixed, Photo, HiRes.Mixed, HiRes.Photo
-3, -2, -1, 0, +1, +2, +3
Tray1, Tray2(optional), Manual
Feeder(MB460), MP Tray(MB470/MB480)
On, Off
On, Off
1in1, 2in1, 4in1(Hor.), 4in1(Ver.)
0.00 inch, 0.25 inch, 0.50 inch, 0.75 inch,
1.00 inch or
0 mm, 6 mm, 13 mm, 19 mm, 25 mm
0.00 inch, 0.25 inch, 0.50 inch, 0.75 inch,
1.00 inch or
0 mm, 6 mm, 13 mm, 19 mm, 25 mm
0.00 inch, 0.25 inch, 0.50 inch, 0.75 inch,
1.00 inch or
0 mm, 6 mm, 13 mm, 19 mm, 25 mm
Copying > 62
a
b
c
d