Appendix
Battery
It takes up to 16 hours for the battery to be fully charged . When it is fully charged, you can expect the
following performance:
Operation
While in use (talking*)
While not in use (standby**)
*Operating times vary depending on your actual use and the age of the battery.
**Handset is not charging or in use.
The battery needs charging when:
•
A new battery is installed in the handset.
•
The handset beeps every minute while on a call.
•
The handset beeps and LOW BATTERY displays on the handset.
•
A battery is properly installed and the screen is blank.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
•
Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.
•
Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.
•
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.
•
Exercise care in handling batteries in order not to create a short circuit with conductive materials.
•
Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations
specified in this manual.
•
Observe proper polarity orientation between the battery and metallic contacts.
•
To prevent fire or shock hazard, do not expose this product to water or any type of moisture.
Operating time
Five hours
Six days
36