View Dialing Options; Dial A Call Log Number - VTech CS5211 User Manual

Telephone operation

View dialing options

Although the call log entries received have 10 digits (the area code plus the seven-digit
number), in some areas, you may dial only the seven digits, or a 1 plus the seven digits, or a
1 plus the area code plus the seven digits. You can change the number of digits that you dial
from or store to the directory.
While reviewing the call log, press # repeatedly to show different dialing options for local and
long distance numbers before dialing or saving the telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before
dialing or saving it in the directory.
When the number is shown in the correct format for dialing, press
to call the number.
If you have programmed the home area code (see page 13), only the last seven digits of the
incoming phone numbers from that area code will be displayed while reviewing the call log.
Press # repeatedly to display all possible dialing options.

Dial a call log number

1. Press CID/ when the telephone is not in use.
VOL-
2. Press CID/ or
VOL-
-OR-
CID/
Press or
VOL-
/ or SELECT to call.
Press
FLASH
/ to browse to the desired entry, then press
VOL+
/ to browse to the desired entry, then press SELECT and DIAL flashes.
VOL+
/ on the handset
FLASH
/
30
800-595-9511
1-800-595-9511
800-595-9511
1-800-595-9511
to call.
FLASH
595-9511
1-595-9511
595-9511
1-595-9511