Sign in today to find solutions:

Don't have an account? Sign up

 
Before using this telephone, please read the
Important safety instructions on page 22 of this
For support, shopping, and everything new at VTech, visit our website at
www.vtechphones.com.
Compatible with
Telephones identified with this logo have reduced noise and interference when
Hearing Aid T-Coil
used with most T-coil equipped hearing aids and cochlear implants. The TIA-
1083 Compliant Logo is a trademark of the Telecommunications Industry
Association. Used under license.
T
TIA-1083
In Canada, please visit www.vtechcanada.com.
The ENERGY STAR
encourages the use of products that save energy and help protect our
environment. We are proud to mark this product with the ENERGY STAR
label indicating it meets the latest energy efficiency guidelines.
manual.
®
program (www.energystar.gov) recognizes and
®
Next page ->

Summary of Contents

  • Page 1

    Before using this telephone, please read the Important safety instructions on page 22 of this For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. The ENERGY STAR encourages the use of products that save energy and help protect our environment.

  • Page 2: Table Of Contents

    Table of contents Getting started . . . . . . . . . . . . . . . . 1 Parts checklist ....1 Telephone base installation .

  • Page 3: Getting Started, Parts Checklist

    Getting started Parts checklist Your telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. A BC D E F PQRS W X Y Z TONE OPER 1. Handset 4. Battery compartment cover 7.

  • Page 4: Telephone Base Installation

    Getting started Telephone base installation If you subscribe to high-speed Internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack to prevent noise and caller ID problems caused by DSL interference.

  • Page 5: Battery Installation And Charging, Wall Bracket Installation, Wall Bracket Installation

    Getting started Battery installation and charging Install the battery as shown below. The battery may have enough charge for short calls and then completely charge and drain the battery two or three times every three months afterwards. For best performance, charge the battery for at least 16 hours before first use.

  • Page 6: Installation

    Getting started Wall bracket installation (continued) Wall bracket installation: First, insert the lower portion tabs of the wall bracket into the lower grooves in the telephone base, then snap the upper portion tabs of the wall bracket into place. Mount the telephone base on the wall by positioning it so the mounting studs fit into the holes on the telephone base and wall bracket.

  • Page 7: Handset Layout

    Getting started Handset layout CHARGE light • On when the handset is charging in the telephone base. /VOL-/CID • When the telephone is not in use, press to review the call log. • Press and hold to adjust the ringer volume when the telephone is not in use.

  • Page 8: Telephone Base Layout

    Getting started Telephone base layout IN USE light • Flashes when there is an incoming call. • On when the handset is in use. VOICEMAIL light • Flashes when you have new voicemail from your telephone company. FIND HANDSET • Press to page the handset.

  • Page 9: Telephone Settings, Date And Time, Ringer, Ringer Volume

    Telephone settings Date and time If you subscribe to caller ID service, the date and time is set automatically with the next incoming call. If you do not have caller ID service, you can set the date and time manually. Press PROG when the handset is not in use.

  • Page 10: Dial Mode, Home Area Code

    Telephone settings Ringer volume (continued) 4. Press SELECT to confirm your selection. You will hear a confirmation tone. -OR- Press and hold current setting when the handset is not in use. The current setting flashes and you will hear a sample of the ringer volume. to select ringer volume from OFF, LOW or HI.

  • Page 11: Language, Clear Voicemail

    Telephone settings Language Press PROG when the handset is not in use. until LANGUAGE is displayed. Press Press SELECT The current setting flashes. Press until the screen displays the desired language (ENGLISH, ESPANOL or FRANCAIS). Press SELECT to confirm your selection. You will hear a confirmation tone. Clear voicemail If you subscribe to voicemail services provided by your telephone company, NEW VOICEMAIL and...

  • Page 12: Telephone Operation, Make Calls, Answer Calls, End Calls, Volume, Channel, Call Waiting, Temporary Tone Dialing

    Telephone operation Make calls • Press and then use the dial pad keys to dial a number. -OR- Enter the phone number first. You can press CHAN/REMOVE to erase digits. Press to dial. Answer calls Press any dial pad keys (except /VOL-/CID, /VOL+/ •...

  • Page 13: Redial, Find Handset, Directory, Store A Directory Entry

    Telephone operation Redial • The telephone stores the five most recently dialed telephone numbers in the redial list. When the list is full, the oldest entry is deleted to make room for the new entry. Press REDIAL/PAUSE, then press • review the redial list.

  • Page 14: Character Chart, Review The Directory, Edit A Directory Entry

    Telephone operation Character chart Use the dial pad keys and the chart below to enter a name (up to 14 characters). An error tone sounds if you try to enter more than 14 characters. Each press of a particular key causes the characters to be displayed in the following order: Characters by number of key presses Dial key...

  • Page 15: Delete A Directory Entry

    Telephone operation Edit a directory entry (continued) When the screen displays the desired entry, press SELECT and EDIT flashes. Press SELECT. The screen displays the name and number. The cursor appears at the beginning of the name. • Use the dial pad keys to edit the name. •...

  • Page 16: Speed Dial, Dial A Number From The Directory, Speed Dial, Store A Speed Dial Entry

    Telephone operation Copy a directory entry into speed dial /VOL+/ Press when the handset is not in use. The screen displays DIRECTORY. Press to scroll through the entries stored in the directory alphabetically. -OR- Press the dial pad key for the first letter of the entry to copy. If necessary, scroll to find the desired entry.

  • Page 17: Edit A Speed Dial Entry

    Telephone operation Store a speed dial entry (continued) The screen displays ENTER NUMBER. Use the dial pad keys to enter the telephone number, and then press SELECT or PROG. • Press to move the cursor to the left or Press CHAN/REMOVE to erase a digit. •...

  • Page 18: Delete A Speed Dial Entry, Dial A Speed Dial Number, Reassign Speed Dial Locations

    Telephone operation Delete a speed dial entry Press and hold the speed dial location key (1-9) of the desired entry when the handset is not in use. When the screen displays the desired entry, press SELECT. Then press flashes. Press SELECT. The screen displays ERASE NO YES and the number. The current choice flashes.

  • Page 19: Call Log, Review The Call Log

    If you have programmed a home area code (page 8), only the last seven digits of the incoming phone numbers from that area code will be displayed while reviewing the call log. Press # repeatedly to display all possible dialing options. VTECH 800-595-9511 6:10 08/17...

  • Page 20: Ready To Dial, Dial A Call Log Number, To The Directory

    Telephone operation Make call log entries ready to dial Although the call log entries received have 10 digits (the area code plus the seven-digit number), in some areas, you may dial only the seven digits, or a 1 plus the seven digits, or a 1 plus the area code plus the seven digits.

  • Page 21: Delete From The Call Log, Delete An Entry, Delete All Entries, Messages

    Telephone operation Save a call log entry to the directory (continued) 5. Enter or edit the name if necessary. See the Character chart on page 12. • Press to move the cursor to the left or Press CHAN/REMOVE to erase a character. •...

  • Page 22: Appendix, Messages

    Appendix Handset display screen messages Displays: LOW BATTERY CID EMPTY CONNECTING... DIRECTORY EMPTY MEMORY FULL XX MISSED CALLS NEW VOICEMAIL **PAGING** PHONE **RINGING** RINGER OFF SCANNING... When: The battery needs to be recharged. There are no call log entries. The cordless handset is searching for the telephone base.

  • Page 23: Battery

    Appendix Battery After the battery is fully charged for 16 hours, you can expect the following performance: Operation While in use (talking) While not in use (standby*) *Handset is off the telephone base but not in use. The battery needs charging when: •...

  • Page 24: Important Safety Instructions

    Appendix Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: Read, understand, and follow all warnings and instructions marked on the product and in this manual. Unplug this product from the wall outlet before cleaning.

  • Page 25: Troubleshooting

    Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511; in Canada, call 1 (800) 267-7377. My telephone does not work at all . •...

  • Page 26

    Appendix Troubleshooting The talk time and standby time of my handset is noticeably shorter than before . • Completely charge and drain the battery two or three times consecutively every three months instead of returning the handset to the telephone base or charger after each use.

  • Page 27

    Appendix Troubleshooting I cannot dial out . • First, try all the above suggestions. • Make sure there is a dial tone before dialing. It is normal if the handset takes a second or two to synchronize with the telephone base before producing a dial tone. Wait an extra second before dialing.

  • Page 28

    Appendix Troubleshooting I hear noise in the handset, and none of the keys or buttons work . • Make sure the telephone line cord is plugged in securely. • Remove and re-insert the battery. My caller ID features are not working properly . •...

  • Page 29

    Appendix Troubleshooting My cordless handset beeps and is not performing normally . • Make sure the power cord is securely plugged into the telephone base. Plug the unit into a different working electrical outlet not controlled by a wall switch. •...

  • Page 30: Operating Range, Maintenance, About Cordless Telephones

    Appendix Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance, which can vary with the locations of the telephone base and handset, the weather, and the layout of your home or office. When the handset is out of range, the handset will display CONNECTING...

  • Page 31: Warranty

    VTech will return repaired or replaced Product under this limited warranty to you, transportation, delivery or handling charges prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity.

  • Page 32

    Warranty Other Limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties.

  • Page 33: Fcc, Acta And Ic Regulations

    20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied VTech belt clip. This Class B digital apparatus complies with Canadian ICES-003.

  • Page 34

    VTech’s participation in RBRC retailers participating in the RBRC centers. Please call 1-800-8-BATTERY disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources. RBRC ®...

  • Page 35: Technical Specifications

    Appendix Technical specifications Frequency control Transmit frequency Channels Nominal effective range Size Weight Power requirements Memory Crystal controlled PLL synthesizer Handset: 5857.20-5865.90 MHz Telephone base: 912.75-917.10MHz Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.

  • Page 36: Index

    Appendix Index About caller ID 16 About cordless telephones 28 Answer calls 10 Appendix 20 Battery 21 Battery installation and charging 3 Call log 17 Call log display screen messages 19 Call waiting 10 Channel 10 Character chart 12 Charging Clear voicemail 9 Copy a directory entry into speed dial 14 Date and time 7...

  • Page 37

    Appendix Index Technical specifications 33 Telephone base installation 2 Telephone base layout 6 Telephone operation 10 Telephone settings 7 Temporary tone dialing 10 The RBRC seal 32 ® Troubleshooting 23 Volume 10 Wall bracket installation 3 Warranty 29...

  • Page 38

    VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc. Beaverton, Oregon Distributed in Canada by VTech Technologies Canada, Ltd., Richmond, B.C. Copyright ©2008 for VTECH TELECOMMUNICATIONS LTD. Printed in China.

  • Page 39

    User’s manual w w w.v t e c h p h o n e s . c o m Models: CS5111/CS5113...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: