Handset Layout - VTech CS5211 User Manual

Getting started

Handset layout

CHARGE light
On when the handset is charging in the telephone base (page 4).
CID/VOL-
Press to review the call log when the telephone is not in use (page 29).
Press and hold to adjust the ringer volume when the telephone is not in use (page 10).
During a call, press to decrease the listening volume. A double beep sounds at the
lowest setting (page 15).
Press to scroll down while in programming mode or reviewing the directory, call log or
redial list.
/FLASH
Press to make or answer a call (page 15).
During a call, press to answer an incoming call when you receive a call waiting alert
(page 16).
TONE
Press to switch to tone dialing temporarily when using the pulse service (page 16).
CHAN/REMOVE
Switch to a clearer channel while on a call (page 16).
Press and hold to delete all records in the call log when the phone is not in use (page 32).
When reviewing the call log or redial list, press to delete the desired record (page 32 or 18).
PROG
Press to enter programming mode while the telephone is not in use.
6