Telephone Settings; Set Date And Time - VTech CS5211 User Manual

Telephone settings

Set date and time

If you subscribe to caller ID service
with the next incoming call. If you do not have caller ID service, you can set the date and time manually.
To set the date and time:
1. Press PROG when the handset is not in use.
2. Press CID/ or
VOL-
3. When the month is flashing, press
press SELECT or PROG.
4. When the date is flashing, press
press SELECT or PROG.
5. When the hour is flashing, press
press SELECT or PROG.
6. When the minute is flashing, press
press SELECT or PROG.
When AM or PM is flashing, press
7.
your settings. You will hear a confirmation tone.
Press OFF to return to idle mode.
8.
When there is a power failure or after battery replacement, the time needs to be reset.
from your telephone service provider,
/ until the screen displays DATE/TIME, then press SELECT.
VOL+
CID/
or
VOL-
CID/
or
VOL-
CID/
or
VOL-
CID/
VOL-
CID/
or
VOL-
/
until the screen displays the correct month and then
VOL+
/
until the screen displays the correct date and then
VOL+
/
until the screen displays the correct hour and then
VOL+
or / until the screen displays the correct minute and then
VOL+
/ to select AM or PM. Press SELECT or PROG to save
VOL+
9
the date and time are set automatically