Quick Tv Cloning Guide (For The Normal Tv) - Sharp LC-32HT3U Operation Manual

General notes

Quick TV cloning guide (for the Normal TV)

If already in Normal TV mode, begin from step 6.
Press MASTER on the Remote Replicator to turn on the TV. (See page 26.)
1
Press MENU and the MENU screen displays.
2
Press c / d to select "PPV TV".
3
PPV TV
TV Mode
PPV System [LODGENET]
Function Menu Setup
Default Channel
Default Volume
Room Mode
CH Re-Map
Reset
Press a / b to select "TV Mode", and then press ENTER.
4
Press c / d to select "Normal TV", and then press ENTER.
5
• When you select "Normal TV", enter "2433" for the password, and then the TV will automatically turn off after the
message. The TV enters the Normal TV mode when it is turned on again.
Selected item
PPV TV
Normal TV
Use the remote control unit to set or adjust the TV. (TV with the master settings) (See pages 36, 44 to 67.)
6
Perform step 3 through step 8 for PPV TV on the previous page. (See page 7.)
7
Wait until the power is completely off.
8
To turn the power on again after performing TEACH, wait approximately 15 seconds after the TV enters
Standby Mode (dark screen). Then turn the power on.
8
[PPV TV]
[2]
[20]
Description
Sets and adjusts the TV, and
communicates with the PPV terminal
box.
Functions as a normal TV.