Function Menu (For Lodgenet And Nstreams Users Only); Option Menu (For Lodgenet And Nstreams Users Only) - Sharp LC-32HT3U Operation Manual

Other settings for the PPV TV mode
Function menu (for LODGENET
and nSTREAMS users only)
You can display the Function menu by pressing the
FUNCTION button on the LODGENET or nSTREAMS
remote control unit. The Function menu items
displayed such as "Parental CTRL", "Language", "View
Mode" and "Input Select" depend on the Function
Menu Setup.
Use the LODGENET or nSTREAMS remote control unit
for the following operations.
Press FUNCTION to display the Function
1
menu.
Press c / d to select "Function".
2
Function
Sleep Timer
Parental CTRL
Closed Caption
Language
View Mode
Input Select
Press a / b to select the desired menu item,
3
and then press SELECT.
• The items in the Function menu depend on the
Function Menu Setup.
Perform the steps below for each item.
4
Selected item
Press a / b to select the desired
Sleep Timer
setting, and then press SELECT.
Parental CTRL See pages 62 to 67.
Closed Caption Press SELECT to select the desired
setting.
Press a/b to select the desired
Language
language, and then press SELECT.
Press a/b to select the desired screen
View Mode
size, and then press SELECT.
Press a/b to select the desired input
Input Select
source, and then press SELECT.
Press FUNCTION to exit.
4
NOTE
• Parental CTRL may not be available when the hotel server
commands not to display the Parental CTRL menu.
• Sleep Timer and Parental CTRL settings are effective for 24
hours. The other settings will be canceled when the TV is
turned off.
30
[Off]
[--]
[English]
[S.Stretch]
Description
Option menu (for LODGENET and
nSTREAMS users only)
You can display the Option menu by pressing the
FUNCTION button on the LODGENET or nSTREAMS
remote control unit when the TV is connected to a
PC-IN equipment and "INPUT6" is selected from the
INPUT SOURCE menu (see page 52).
Use the LODGENET or nSTREAMS remote control unit
for the following operations.
Press FUNCTION to display the Option menu.
1
Press c / d to select "Option".
2
Option
Input Signal
Auto Sync.
Press a / b to select the desired menu item,
3
and then press SELECT.
Perform the steps below for each item.
4
Selected item
Press a/b to select the desired input
Input Signal
signal, and then press SELECT.
Press c/d to select "Yes", and then
Auto Sync.
press SELECT.
5
Press FUNCTION to exit.
NOTE
• "Input Signal" and "Auto Sync." are grayed out when "Input
Select" is set to "DIGITAL".
[1024g768]
Description