Displaying An Image From Hdmi Equipment; Input Skip - Sharp LC-32HT3U Operation Manual

Using external equipment
Displaying an image from
HDMI equipment
To watch an HDMI/PC-IN equipment image,
1
select "INPUT4" or "INPUT5" from "INPUT
SOURCE" menu using INPUT on the remote
control unit or on the TV.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Press MENU to display the MENU screen, and
2
then press c / d to select "Option".
Press a / b to select "HDMI Setup", and then
3
press ENTER.
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
Press a / b to select the desired item, and
4
then press ENTER.
Press c / d to select the desired setting, and
5
then press ENTER.
HDMI
Selectable
Setup
items
items
Auto View Enable
Disable
Digital
Audio
Select Analog
Press MENU to exit.
6
NOTE
• Refer to your external equipment operation manual for the
signal type.
• "Audio Select" is only available for INPUT 5.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
52
PPV TV
NORMAL TV
[Low]
[Fixed]
Description
Set whether or not to
use View Mode based
on signal recognition,
including an HDMI signal.
Select "Digital" for an
audio signal via the HDMI
terminal. Select "Analog"
for an audio signal via the
R-AUDIO -L terminal.

Input Skip

This setting allows you to skip the HDMI/PC-IN Input
on the Input Selection operation.
Press MENU to display the MENU screen, and
1
then press c / d to select "Setup".
Press a / b to select "Input Skip", and then
2
press ENTER.
Press a / b to select the Input (INPUT 4,
3
INPUT 5 or INPUT 6) you wish to skip, and
then press ENTER.
Input 4 (HDMI)
Input 5 (HDMI)
Input 6 (RGB)
Press c / d to select "Yes", and then press
4
ENTER.
Press MENU to exit.
5
PPV TV
NORMAL TV
Yes No