Sharp LC-32HT3U Operation Manual page 71

Other viewing options
1
2
1
2
70
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable
converter connected to the TV can be operated using 1 to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
4 CH r / s
3
Press CH r or CH s to tune in a higher or lower
channel.
4
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9, • (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 ENTER, a / b / c / d
ENTER: Press to activate the selected function.
a / b / c / d : Press the button to select items on the
NOTE
• CABLE and SAT cannot be selected at the same time.
3
SAT GUIDE screen or SAT MENU screen.