Quick Setup For Oncommand Users; Ppv System; Default Channel - Sharp LC-32HT3U Operation Manual

Quick setup for ONCOMMAND users

For quick setup, use the remote control unit to perform
the following operations. Before the setup, press
MASTER on the Remote Replicator to turn on the TV
in the MASTER mode.
PPV TV
TV Mode

PPV System

[ONCOMMAND]

Default Channel

Default Volume
Room Mode
Label Input
CH Re-Map
Reset
PPV System
Sets the Pay Per View system.
Press MENU and the MENU screen displays.
1
Press c/d to select "PPV TV".
2
Press a / b to select "PPV System", and then
3
press ENTER.
Press a / b to select "ONCOMMAND", and
4
then press ENTER.
• The TV will automatically turn off. Press MASTER
on the Remote Replicator to turn on the TV again.
[PPV TV]
[2]
[20]
Default Channel
Sets the default channel.
Repeat steps 1 and 2 in PPV System.
1
Press a / b to select "Default Channel", and
2
then press ENTER.
Press a / b to select "Analog/Digital", and
3
then press ENTER.
Press c / d to select "Analog" or "Digital", and
4
then press ENTER.
Press a/b to select "Analog" or "Digital", and
5
then press ENTER.
Input the default channel number by using
6
0 – 9, and then press ENTER.
• The channel number is based on the physical
number, and it may be different from the displayed
channel number specifi ed by the hotel server.
Press MENU to exit.
7
NOTE
• Default Channel setting from the hotel server has priority
over the TV setting when the TV is connected to the PPV
terminal box (ONLINE).
• The TV returns to the default channel when the TV is turned
on and is not connected to the PPV terminal box (STAND
ALONE).
13