Other Viewing Options; Freezing Images; Presetting Remote Control Function - Sharp LC-32HT3U Operation Manual

Other viewing options

Freezing images

Allows you to capture and freeze a moving image that
you are watching.
Press FREEZE.
1
• A moving image is captured.
Press FREEZE again to cancel the function.
2
NOTE
• When this function is not available, "No displaying still
image available." will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
cancelled and a V-CHIP BLOCK message will appear.
68
PPV TV

Presetting remote control function

NORMAL TV
You can operate the connected AV products (AV
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)
using the presetting manufacturer function of your
remote control unit.
Presetting manufacturer codes
1
2
3
4
Press FUNCTION until the LED for your
device lights up.
After the LED for your device lights up,
press FUNCTION and DISPLAY at the
same time to enter the code registration
mode. The LED will blink.
Press 0–9 to enter the manufacturer code.
(See page 69.)
• Preset mode is fi nished once the LED no
longer lights up.
After registering the code, the LED will stop
blinking then turn off after one second. (If
you perform an incorrect operation, the LED
will blink quickly then turn off.)