Useful adjustment settings
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Press INPUT to select the desired input
1
source.
Press MENU to display the MENU screen, and
2
then press c / d to select "Setup".
Press a / b to select "Input Label", and then
3
press ENTER.
Press a / b / c / d to select the new name for
4
the input mode, and then press ENTER.
INPUT SOURCE
Press MENU to exit.
5
NOTE
• You cannot change labels if the INPUT SOURCE is TV.
PPV TV
NORMAL TV
Example
TV
DVD
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Sleep Timer
For LODGENET and nSTREAMS users, set the
Sleep Timer from the Function menu.
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
1
• The remaining time displays when the sleep timer
has been set.
Sleep Timer: Remaining
Each time you press SLEEP, the remaining
2
time switches as shown below.
• When set, the time automatically starts counting
down.
• If you want to adjust the sleep timer, you can
press SLEEP twice then change the time setting.
• Five minutes before the time expires, the
remaining time displays every minute.
Off
120
NOTE
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time reaches
zero.
• When the sleep timer is set, its indicator on the TV lights
red.
PPV TV
NORMAL TV
30
30
60
90
55