Quick Tv Cloning Guide (For The Ppv Tv) - Sharp LC-32HT3U Operation Manual

General notes

Quick TV cloning guide (for the PPV TV)

The steps below show the process of setting TVs for hotel guest rooms.
Press MASTER on the Remote Replicator to turn on the TV. (See page 26.)
1
Use the remote control unit to set or adjust the TV (TV with the master settings).
2
(LODGENET users: See pages 9 to 12. ONCOMMAND users: See pages 13 to
16. NXTV users: See pages 17 to 19. nSTREAMS users: See pages 20 to 22.
SeaChange users: See pages 23 to 25.)
Connect the TRANSPORT terminal of the TV to the TRANSPORT (RJ-11)
3
connector of the Remote Replicator with the supplied RJ-11 cable.
• For NXTV users, perform steps on page 27 before connecting the TV and the
Remote Replicator.
RJ-11 cable
Press MEMORY SELECT on the Remote Replicator to select the memory bank number in which you
4
want to store the data. (See pages 26 and 27.)
Press LEARN on the Remote Replicator to store the TV settings in the Remote Replicator. (See pages 26
5
and 27.)
Disconnect the RJ-11 cable from the TV (TV with the master settings), and connect to the other TV (TV to
6
be cloned) that you want to transfer the data.
• For NXTV users, perform steps on page 27 before connecting the TV and the Remote Replicator.
Press MEMORY SELECT on the Remote Replicator to select the memory bank number that contains the
7
data you want to send. (See pages 26 and 27.)
Press TEACH on the Remote Replicator to transfer the TV settings. (See pages 26 and 27.)
8
7