Initial Setup - Sharp LC-32HT3U Operation Manual

Watching TV

Initial setup

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 32.)
2. Connect the antenna cable to the TV. (See page 15 of the operation manual for the LC-32HT3U/LC-37HT3U/LC-42HT3U.)
Language setting
Select from among 3 languages: English, French and
Spanish.
Press a / b to select the desired language
1
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your
TV when selecting "Air" or "Cable".
Press c / d to select "Air" or "Cable".
2
Press ENTER to enter the setting.
Language
Air/Cable
CH Search
36
English
Français
Español
Example
Air Cable
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area..
When "Air" is selected in Antenna setting:
3
Press c / d to select "Start", and then press
ENTER.
Language
Air/Cable
CH Search
When "Cable" is selected in Antenna setting:
Press a / b to select "Analog & Digital Search
Start" to search both analog and digital
broadcasts or "Analog Search Start" to search
only analog broadcasts, and then press
ENTER.
Language
Air/Cable
CH Search
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel",
and then press ENTER.
CH Search
Air [ 25 ]
Air
Audio
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again. (See page 44.)
Start Cancel
Analog & Digital Search Start
Analog Search Start
Cancel
Example
Found [ 20 ]
ANALOG
2
: MONO