Using External Equipment; Displaying An External Equipment Image; Input Select - Sharp LC-32HT3U Operation Manual

Using external equipment

Displaying an external
equipment image
To view external source images, select the input
source from INPUT on the remote control unit or on
the TV.
Press INPUT.
1
• A list of selectable sources appears.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
Press INPUT again to select the input source.
2
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source
toggles.
• You can also select the input source by pressing
a / b .
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
NOTE
• See pages 33 and 34 for external equipment connection.

Input Select

PPV TV
NORMAL TV
If the image does not come in clearly from the external
equipment connected to INPUT 1 or 2 (LC-42HT3U
only), you may need to change the input signal type
setting on the "Input Select" menu.
Press MENU to display the MENU screen, and
1
then press c / d to select "Option".
Press a / b to select "Input Select", and then
2
press ENTER.
Press a / b to select the signal type you want
3
to set, and then press ENTER.
• If the selected signal type is incorrect, images are
Press MENU to exit.
4
• The setting is stored and can be selected on the
NOTE
• Refer to your external equipment operation manual for the
signal type.
• If you set INPUT 1 or 2 (LC-42HT3U only) to Auto, the TV
will automatically select the input signal.
• Setting INPUT 1 or 2 (LC-42HT3U only) signal selection to
"Auto" when other equipment is connected will result in the
following connection priority.
INPUT 1 or 2 (LC-42HT3U only):
1 COMPONENT VIDEO
2 VIDEO
not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
"INPUT SOURCE" menu.
NORMAL TV
51