Display - Garmin G3X Pilot's Manual

System Overview

DISPLAY

The Backlight Intensity (display brightness) can be set to 'Auto' or 'Manual'. 'Auto'
sets the Backlight Intensity based on the aircraft's instrument lighting bus voltage.
With 'Manual' selected, the pilot can manually adjust the desired backlight intensity
(1-10). After each power cycle the Backlight Intensity is set to the default, which is
configurable. Refer to the G3X Installation Manual for more information.
'EIS
Display
Location'
Menu
Option
Adjusting backlight intensity:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Display', and press the ENT
Key.
4) Turn the FMS Joystick to highlight 'Auto'.
Or:
a) Turn the FMS Joystick to highlight 'Manual'.
b) Move the FMS Joystick to highlight the desired Backlight Intensity
(1-10).
5) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
COLOR MODE
The Color Mode setting is used to adjust the color brightness used on the map and
synthetic vision display for day or night use.
50
Display Setup Page
Garmin G3X Pilot's Guide 190-01115-00 Rev. J