Garmin G3X Pilot's Manual page 290

Additional Features
Displaying ChartView:
1) With the Waypoint (WPT) Page displayed, press the CHART Softkey.
2) Press the FMS Joystick to activate the cursor.
3) Move the FMS Joystick to highlight the Airport Identifier Field and use the
FMS Joystick to begin entering the desired airport.
Or:
a) Move the FMS Joystick to highlight the Chart Field.
b) Turn the FMS Joystick to access a drop-down menu of available charts.
c) Turn or move the FMS Joystick to select the desired chart, and press
the ENT Key.
Or:
1) From the Active Flight Plan Page (with a waypoint entered), press the SEL
APPR Softkey. The 'Select Approach Window' is displayed.
2) Press the MENU Key.
3) Turn or move the FMS Joystick to select 'Show Chart', and press the ENT
Key. The selected chart is displayed.
4) Press the EXIT Softkey to return to the previous page.
Or:
1) From the Map Page or Active Flight Plan Page, use the Map Pointer
to highlight the desired airport and press the ENT Key. The Airport
Information Window is displayed.
2) Press the CHART Softkey.
3) With the 'Chart' Field highlighted, turn the FMS Joystick to access a drop-
down menu of available charts.
4) Turn or move the FMS Joystick to select the desired chart, and press the
ENT Key.
When a terminal procedure chart is not available for the requested airport or there
is an error rendering the data, the banner "CHART NOT AVAILABLE" appears on
the screen. The "CHART NOT AVAILABLE" banner does not refer to the ChartView
subscription, but rather the availability of a particular airport chart selection or
procedure for a selected airport.
270
Garmin G3X Pilot's Guide 190-01115-00 Rev. J