Manually Switching Between Internal And External Flight Plan Sources - Garmin G3X Pilot's Manual

Flight Planning
MANUALLY SWITCHING BETWEEN INTERNAL AND
EXTERNAL FLIGHT PLAN SOURCES
NOTE: The selection of the internal GPS navigation source to persist through
power cycles or reset to the external GPS navigation source is dependant on
the configuration. Refer to the G3X Installation Manual for more information.
Press the INTERNAL Softkey on the Active Flight Plan Page or the Direct-to Page, to
temporarily allow flight planning through the G3X using the internal GPS flight plan
when an external GPS Navigator is configured. Press the EXTERNAL Softkey to return
to the external GPS navigator's flight plan.
When manually selecting the internal GPS flight plan, 'INT' is displayed in light blue
in the upper left corner of the Data Bar as well as the lower left quadrant of the HSI.
Using Internal
GPS Flight Plan
INT: The pilot has
elected to use the
internal GPS naviga-
tion source instead
of the external GPS
navigation source.
162
Internal Flight Plan Indication
Garmin G3X Pilot's Guide 190-01115-00 Rev. J