Displaying/Removing The Track Log On The Map Page; Changing Track Log Settings - Garmin G3X Pilot's Manual

Appendix B
The percentage of memory used by the current track log appears at the top of the
Track Log Window. After the track log is cleared, it shows zero percent. When the
screen reaches 100%, the most recent track points start to overwrite the least recent
track points (if 'Wrap' is selected in the Record Mode Field). To avoid losing track
points, save the track log when it approaches the 99% mark.
The Save feature allows storage of up to 15 track logs.

Displaying/removing the track log on the Map Page:

1) From the Map Page, press the MENU Key. The Map Page Menu is
displayed. (The 'Track Log' option is not available from the full-screen PFD
Main Menu).
2) Turn or move the FMS Joystick to select 'Set Up Map' from the Map Page
Menu, and press the ENT Key.
3) Turn the FMS Joystick to highlight the 'Line' options from the horizontal
list.
4) Move the FMS Joystick to highlight the 'Track Log' field.
5) Turn the FMS Joystick to select 'On' or 'Off', and press the ENT Key.
6) Press the FMS Joystick, the CLR Key, or the EXIT Softkey to return to the
Map Page.
Map Page Menu
(Split-Screen)

Changing track log settings:

1) From the split-screen or full-screen MFD, press the MENU Key twice. (The
'Track Log' option is not available from the full-screen PFD Main Menu).
2) Turn or move the FMS Joystick to select 'Track Log' from the Main Menu,
and press the ENT Key.
352
Garmin G3X Pilot's Guide
Map Setup Page
190-01115-00 Rev. J