Map Range - Garmin G3X Pilot's Manual

MAP RANGE

NOTE: Refer to the Additional Features section for information on changing
the FliteCharts
There are 23 different map ranges available, from 200 feet to 800 nm. The current
range is indicated in the lower right corner of the map. The scale bar represents the
map scale. To change the map range on any map, use the down arrow on the RNG
Key to zoom in (decreasing), or the up arrow to zoom out (increasing).
When the selected range exceeds the resolution of the map data, 'overzoom'
appears below the map range scale.
AUTO ZOOM
Auto Zoom allows the G3X to change the map display range to the smallest range
clearly showing the active waypoint. Auto Zoom can be overridden by adjusting the
range and remains that way until the active waypoint changes, a terrain or traffic alert
occurs, or the aircraft takes off.
Enabling/disabling autozoom:
1) With the Map Page displayed, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map' and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'General' Menu.
4) Move the FMS Joystick to highlight the 'Autozoom' field.
5) Turn the FMS Joystick to access the 'On/Off' drop down list.
6) Turn or move the FMS Joystick to highlight the desired option, and press
the ENT Key.
190-01115-00 Rev. J
or ChartView range.
®
Map Range/Overzoom
(Split-Screen)
Garmin G3X Pilot's Guide
GPS Navigation
Scale Bar Rep-
resenting a Map
Scale of 3 nm Per
Scale Width.
127