Garmin G3X Pilot's Manual page 341

VOR APPROACH
A VOR approach is flown using VOR Mode.
Selecting a VOR Approach:
1) EXTERNAL NAVIGATOR: Tune and activate the desired VOR frequency.
GTN or GNS series unit is not configured skip to Step 3.
2) EXTERNAL NAVIGATOR (GTN or GNS series units only): Ensure the 'VLOC'
indication is showing in the lower-left corner of the
Key.
3) G3X: Ensure that VOR1 or VOR2 is the selected navigation source (use
the CDI SRC Softkey on the PFD or PFD Page to cycle through external
navigation sources if necessary). It should say 'VOR1' or 'VOR2' on the HSI
and the needle should be green.
4) G3X: From the PFD or PFD Page, press the VOR CRS Softkey (
XPDR/CRS > VOR CRS if a transponder is configured) and turn the FMS
Joystick to select the inbound approach course (radial).
5) G3X: From the PFD or PFD Page, press the HDG/ROLL Softkey to access
the autopilot lateral modes and then press the AP NAV Softkey. If there
is less than half-scale deviation when the AP NAV Softkey is pressed, VOR
Mode will activate (green text), intercept, and track the selected radial.
If there is more than half-scale deviation when the AP NAV Softkey is
pressed, VOR Mode will arm (white text) first, then activate when closer to
the radial.
6) Adjust the aircraft's pitch axis as required.
190-01115-00 Rev. J
Integrated Autopilot
Garmin G3X Pilot's Guide
. If not, press the CDI
or press
If a
321