Satellite View - Garmin G3X Pilot's Manual

VFR MAP Softkey

SATELLITE VIEW

The Satellite View displays satellite imagery above 20nm.
Displaying/removing satellite imagery on the map page:
1) Press the MAP Softkey on the Map Page. Press the VFR MAP Softkey (if
necessary).
2) Press the SAT VIEW Softkey. Satellite imagery is displayed on the map.
3) Press the SAT VIEW Softkey again to remove satellite imagery from the
Navigation Map.
Or:
1) From the Map Page, press the MENU Key.
2) Turn or move the FMS Joystick to highlight 'Set Up Map', and press the
ENT Key.
3) Turn the FMS Joystick to highlight the 'Map' Category from the horizontal
list.
4) Move the FMS Joystick to highlight the 'Satellite View' field.
5) Turn the FMS Joystick to select 'On' or 'Off', and press the ENT Key.
190-01115-00 Rev. J
Topographic Data (Map Page)
(Split-Screen)
Garmin G3X Pilot's Guide
GPS Navigation
TOPO Softkey
133