Displaying/Removing The Track Log On The Map Page - Garmin G3X Touch Pilot's Manual

Appendix B
The track log starts recording as soon as the G3X Touch gets a location fix. For the
best results, clear the track log before each flight. When the track log is full, new track
points overwrite the oldest track points (if set to 'Wrap' in the Track Log Settings).
The percentage of memory used by the current track log appears at the top of the
Track Log Window. After the track log is cleared, it shows zero percent. When the
screen reaches 100%, the most recent track points start to overwrite the least recent
track points (if 'Wrap' is selected in the Record Mode Field). To avoid losing track
points, save the track log when it approaches the 99% mark.
The Save feature allows storage of up to 15 track logs.

Displaying/removing the track log on the Map Page:

1) From the Map Page, press the MENU Key. The Map Options Window is
displayed.
2) Touch the Set Up Map... Button to display the Map Setup Page.
3) Touch the Line Tab to display the track log setup options.
4) Touch the Track Log Show/Hide Button.
5) Touch the Show Button to display the track log. Touch the Hide Button to
remove the track log.
6) Press the BACK Key to return to the Map Page.
274
Track Log
Track Log (Map Page)
Garmin G3X Touch Pilot's Guide 190-01754-00 Rev. A